Maths

NUMBER and PLACE VALUE

• count to and across 100, forwards and backwards, beginning with 0 or 1, or from any given number
• count, read and write numbers to 100 in numerals
• count in multiples of twos, fives and tens
• given a number, identify one more and one less
• identify and represent numbers using objects
• identify and represent numbers using pictorial representations including the number line
• use the language of: equal to, more than, less than (fewer), most, least
• read and write numbers from 1 to 20 in numerals and words

CALCULATION

• read, write and interpret mathematical statements involving addition (+), subtraction (–) and equals (=) signs
• represent and use number bonds and related subtraction facts within 20
• add and subtract one-digit and two-digit numbers to 20, including zero
• solve one-step problems that involve addition and subtraction, using concrete objects and pictorial representations, and missing number problems such as 7 = – 9.
• solve one-step problems involving multiplication and division, by calculating the answer using concrete objects
• solve one-step problems involving multiplication and division using pictorial representations and arrays with the support of the teacher

FRACTIONS AND DECIMALS

• recognise, find and name a half as one of two equal parts of an object, shape
• recognise, find and name a half of a quantity
• recognise, find and name a quarter as one of four equal parts of an object, shape recognise, find and name a quarter of a quantity

MEASURES

• compare, describe and solve practical problems for:
  • lengths and heights [for example, long/short, longer/shorter, tall/short, double/half]
  • mass/weight [for example, heavy/light, heavier than, lighter than]
  • capacity and volume [for example, full/empty, more than, less than, half, half full, quarter]
  • time [for example, quicker, slower, earlier, later]
• measure and begin to record the following:
  • lengths and heights
  • mass/weight
  • capacity and volume
  • time (hours, minutes, seconds)
• recognise and know the value of different denominations of coins and notes
• sequence events in chronological order using language [for example, before and after, next, first, today, yesterday, tomorrow, morning, afternoon and evening]
• recognise and use language relating to dates, including days of the week, weeks, months and years
• tell the time to the hour and half past the hour draw the hands on a clock face to show these times. [hour and half past the hour]

GEOMETRY

• recognise and name common 2-D and 3-D shapes, including:
  • 2-D shapes [for example, rectangles (including squares), circles and triangles]
  • 3-D shapes [for example, cuboids (including cubes), pyramids and spheres].
• describe position, direction and movement, including whole, half, quarter and three-quarter turns

STATISTICS

• No key expectations. However pupils should continue to build on visual representations of information experienced in Early Years.

NUMBER and PLACE VALUE

• count in steps of 2, 3, and 5 from 0, and in tens from any number, forward and backward
• recognise the place value of each digit in a two-digit number (tens, ones)
• identify, represent and estimate numbers using different representations, including the number line
• compare and order numbers from 0 up to 100; use <, > and = signs
• read and write numbers to at least 100 in numerals
• read and write numbers to at least 100 in words
• use place value and number facts to solve problems

CALCULATION

• solve problems with addition and subtraction:
  • using concrete objects and pictorial representations, including those involving numbers, quantities and measures
  • applying their increasing knowledge of mental and written methods
• recall and use addition and subtraction facts to 20 fluently
• derive and use related facts up to 100
• add and subtract numbers using concrete objects, pictorial representations, and mentally, including:
  • a two-digit number and ones
  • a two-digit number and tens
  • two two-digit numbers
  • adding three one-digit numbers
• show that addition of two numbers can be done in any order (commutative) and subtraction of one number from another cannot
• recognise and use the inverse relationship between addition and subtraction and use this to check calculations and solve missing number problems
• recall and use multiplication and division facts for the 2, 5 and 10 multiplication tables, including recognising odd and even numbers
• calculate mathematical statements for multiplication and division within the multiplication tables and write them using the multiplication (×), division (÷) and equals (=) signs  show that multiplication of two numbers can be done in any order (commutative) and division of one number by another cannot
• solve problems involving multiplication and division, using materials, arrays, repeated addition, mental methods, and multiplication and division facts, including problems in contexts

FRACTIONS AND DECIMALS

• recognise, find, name and write fractions 1/3, 1/4, 2/4 and 3/4 of a length, shape, set of objects or quantity
• write simple fractions for example, 1/2 of 6 = 3 recognise the equivalence of 2/4 and 1/2.

MEASURES

• choose and use appropriate standard units to estimate and measure length/height in any direction (m/cm); mass (kg/g); temperature (°C); capacity (litres/ml) to the nearest appropriate unit, using rulers, scales, thermometers and measuring vessels
• compare and order lengths, mass, volume/capacity and record the results using >, < and =
• recognise and use symbols for pounds (£) and pence (p); combine amounts to make a particular value
• find different combinations of coins that equal the same amounts of money
• solve simple problems in a practical context involving addition and subtraction of money of the same unit, including giving change
• compare and sequence intervals of time
• tell and write the time to five minutes, including quarter past/to the hour and draw the hands on a clock face to show these times
• know the number of minutes in an hour and the number of hours in a day.

GEOMETRY

• identify and describe the properties of 2-D shapes, including the number of sides and line symmetry in a vertical line
• identify and describe the properties of 3-D shapes, including the number of edges, vertices and faces
• identify 2-D shapes on the surface of 3-D shapes [for example, a circle on a cylinder and a triangle on a pyramid]
• compare and sort common 2-D and 3-D shapes and everyday objects.
• order and arrange combinations of mathematical objects in patterns and sequences
• use mathematical vocabulary to describe position, direction and movement, including movement in a straight line and distinguishing between rotation as a turn and in terms of right angles for quarter, half and three-quarter turns (clockwise and anti-clockwise)

STATISTICS

• interpret and construct simple pictograms, tally charts, block diagrams and simple tables
• ask and answer simple questions by counting the number of objects in each category and sorting the categories by quantity
• ask and answer questions about totalling and comparing categorical data.

NUMBER AND PLACE VALUE

• count from 0 in multiples of 4, 8, 50 and 100
• find 10 or 100 more or less than a given number
• recognise the place value of each digit in a three-digit number (hundreds, tens, ones)
• compare and order numbers up to 1000
• identify, represent and estimate numbers using different representations
• read and write numbers up to 1000 in numerals and in words
• solve number problems and practical problems involving these ideas.

CALCULATION

• add and subtract numbers mentally, including:
  • a three-digit number and ones
  • a three-digit number and tens
  • a three-digit number and hundreds
• add and subtract numbers with up to three digits, using formal written methods of columnar addition and subtraction
• estimate the answer to a calculation and use inverse operations to check answers
• solve problems, including missing number problems, using number facts, place value, and more complex addition and subtraction.
• recall and use multiplication and division facts for the 3, 4 and 8 multiplication tables
• write and calculate mathematical statements for multiplication and division using the multiplication tables that they know, including for two-digit numbers times one-digit numbers, using mental and progressing to formal written methods
• solve problems, including missing number problems, involving multiplication and division,
• solve positive integer scaling problems and correspondence problems in which n objects are connected to m objects.

FRACTIONS AND DECIMALS

• count up and down in tenths; recognise that tenths arise from dividing an object into 10 equal parts and in dividing one-digit numbers or quantities by 10
• recognise, find and write fractions of a discrete set of objects: unit fractions and non-unit fractions with small denominators
• recognise and use fractions as numbers: unit fractions and non-unit fractions with small denominators
• recognise and show, using diagrams, equivalent fractions with small denominators
• add and subtract fractions with the same denominator within one whole [for example, 5/7 + 1/7 = 6/7]
• compare and order unit fractions, and fractions with the same denominators
• solve problems that involve fractions and decimals

MEASURES

• measure, compare, add and subtract: lengths (m/cm/mm); mass (kg/g); volume/capacity (l/ml)
• measure the perimeter of simple 2-D shapes
• add and subtract amounts of money to give change, using both £ and p in practical contexts
• tell and write the time from an analogue clock, including using Roman numerals from I to XII, and 12-hour and 24- hour clocks
• estimate and read time with increasing accuracy to the nearest minute
• record and compare time in terms of seconds, minutes and hours
• use vocabulary such as o’clock, a.m./p.m., morning, afternoon, noon and midnight
• know the number of seconds in a minute and the number of days in each month, year and leap year
• compare durations of events [for example to calculate the time taken by particular events or tasks].

GEOMETRY

• draw 2-D shapes and make 3-D shapes using modelling materials; recognise 3-D shapes in different orientations and describe them
• recognise angles as a property of shape or a description of a turn
• identify right angles
• recognise that two right angles make a half-turn, three make three quarters of a turn and four a complete turn
• identify whether angles are greater than or less than a right angle
• identify horizontal and vertical lines
• identify pairs of perpendicular and parallel lines in shapes

STATISTICS

• interpret and present data using bar charts, pictograms and tables
• solve one-step and two-step questions using information presented in scaled bar charts and pictograms and tables [for example, ‘How many more?’ and ‘How many fewer?’]

NUMBER AND PLACE VALUE

• count in multiples of 6, 7, 9, 25 and 1000
• find 1000 more or less than a given number
• count backwards through zero to include negative numbers
• recognise the place value of each digit in a four-digit number (thousands, hundreds, tens, and ones)
• order and compare numbers beyond 1000
• identify, represent and estimate numbers using different representations
• round any number to the nearest 10, 100 or 1000
• solve number and practical problems that involve all of the above and with increasingly large positive numbers
• read Roman numerals to 100 (I to C)
• know that over time, the numeral system changed to include the concept of zero and place value.

CALCULATION

• add and subtract numbers with up to 4 digits
• using the formal written methods of columnar addition and subtraction where appropriate
• estimate and use inverse operations to check answers to a calculation
• solve addition and subtraction two-step problems in contexts
• decide which operations and methods to use and why.
• recall multiplication and division facts for multiplication tables up to 12 × 12
• use place value, known and derived facts to multiply and divide mentally
• multiplying by 0 and 1; dividing by 1; multiplying together three numbers
• recognise and use factor pairs
• understand commutatively in mental calculations
• multiply two-digit and three-digit numbers by a one-digit number using formal written layout
• solve problems involving multiplying and adding,
• use the distributive law to multiply two digit numbers by one digit
• solve integer scaling problems
• solve harder correspondence problems such as n objects are connected to m objects.

FRACTIONS AND DECIMALS

• recognise and show, using diagrams, families of common equivalent fractions
• count up and down in hundredths;
• recognise that hundredths arise when dividing an object by one hundred and dividing tenths by ten.
• solve problems involving increasingly harder fractions to calculate quantities,
• use fractions to divide quantities, including non-unit fractions where the answer is a whole number
• add and subtract fractions with the same denominator
• recognise and write decimal equivalents of any number of tenths or hundredths
• recognise and write decimal equivalents to 1/4, 1/2, 3/4
• find the effect of dividing a one- or two-digit number by 10 and 100, identifying the value of the digits in the answer as ones, tenths and hundredths
• round decimals with one decimal place to the nearest whole number
• compare numbers with the same number of decimal places up to two decimal places
• solve simple measure and money problems involving fractions and decimals to two decimal places.

MEASURES

• convert between different units of measure [for example, kilometre to metre; hour to minute]
• measure and calculate the perimeter of a rectilinear figure (including squares) in centimetres and metres
• find the area of rectilinear shapes by counting squares
• estimate, compare and calculate different measures
• estimate, compare and calculate different measures, including money in pounds and pence

GEOMETRY

• compare and classify geometric shapes, including quadrilaterals and triangles, based on their properties and sizes
• identify acute and obtuse angles and compare and order angles up to two right angles by size
• identify lines of symmetry in 2-D shapes presented in different orientations
• complete a simple symmetric figure with respect to a specific line of symmetry.
• describe positions on a 2-D grid as coordinates in the first quadrant
• describe movements between positions as translations of a given unit to the left/right and up/down
• plot specified points and draw sides to complete a given polygon.

STATISTICS

• interpret and present discrete and continuous data using appropriate graphical methods, including bar charts and time graphs
• solve comparison, sum and difference problems using information presented in bar charts, pictograms, tables and other graphs

NUMBER AND PLACE VALUE

• read, write, order and compare numbers to at least 1 000 000 and determine the value of each digit
• count forwards or backwards in steps of powers of 10 for any given number up to 1 000 000
• interpret negative numbers in context, count forwards and backwards with positive and negative whole numbers, including through zero
• round any number up to 1 000 000 to the nearest 10, 100, 1000, 10 000 and 100 000
• solve number problems and practical problems that involve all of the above
• read Roman numerals to 1000 (M) and recognise years written in Roman numerals
• round decimals with two decimal places to the nearest whole number and to one decimal place
• read, write, order and compare numbers with up to three decimal places
• solve problems involving number up to three decimal places

CALCULATION

• add and subtract whole numbers with more than 4 digits, including using formal written methods (columnar addition and subtraction)
• add and subtract numbers mentally with increasingly large numbers
• use rounding to check answers to calculations and determine, in the context of a problem, levels of accuracy
• solve addition and subtraction multi-step problems in contexts, deciding which operations and methods to use and why.
• identify multiples and factors, including finding all factor pairs of a number, and common factors of two numbers
• know and use the vocabulary of prime numbers, prime factors and composite (non-prime) numbers
• establish whether a number up to 100 is prime and recall prime numbers up to 19
• multiply numbers up to 4 digits by a one- or two-digit number using a formal written method, including long multiplication for two-digit numbers
• multiply and divide numbers mentally drawing upon known facts
• divide numbers up to 4 digits by a one-digit number using the formal written method of short division and interpret remainders appropriately for the context
• multiply and divide whole numbers and those involving decimals by 10, 100 and 1000
• recognise and use square numbers and cube numbers, and the notation for squared (2) and cubed (3)
• solve problems involving multiplication and division including using their knowledge of factors and multiples, squares and cubes
• solve problems involving addition, subtraction, multiplication and division and a combination of these, including understanding the meaning of the equals sign
• solve problems involving multiplication and division, including scaling by simple fractions and problems involving simple rates.

FRACTIONS AND PERCENTAGES

• compare and order fractions whose denominators are all multiples of the same number
• identify, name and write equivalent fractions of a given fraction, represented visually, including tenths and hundredths
• recognise mixed numbers and improper fractions and convert from one form to the other and write mathematical statements > 1 as a mixed number [for example, 2/5 + 4/5 = 5/6 = 1 1/5 ]
• add and subtract fractions with the same denominator and denominators that are multiples of the same number
• multiply proper fractions and mixed numbers by whole numbers, supported by materials and diagrams
• read and write decimal numbers as fractions [for example, 0.71 = 71/100 ]
• recognise and use thousandths and relate them to tenths, hundredths and decimal equivalents
• recognise the per cent symbol (%) and understand that per cent relates to ‘number of parts per hundred’, and write percentages as a fraction with denominator 100, and as a decimal
• solve problems which require knowing percentage and decimal equivalents of 1/2, 1/4, 1/5, 2/5, 4/5 and those fractions with a denominator of a multiple of 10 or 25.

MEASURES

• convert between different units of metric measure (for example, kilometre and metre; centimetre and metre; centimetre and millimetre; gram and kilogram; litre and millilitre)
• understand and use approximate equivalences between metric units and common imperial units such as inches, pounds and pints
• measure and calculate the perimeter of composite rectilinear shapes in centimetres and metres
• calculate and compare the area of rectangles (including squares), and including using standard units, square centimetres (cm2) and square metres (m2) and estimate the area of irregular shapes
• estimate volume [for example, using 1 cm3 blocks to build cuboids (including cubes)] and capacity [for example, using water]
• solve problems involving converting between units of time
• use all four operations to solve problems involving measure [for example, length, mass, volume, money] using decimal notation, including scaling,

GEOMETRY

• identify 3-D shapes, including cubes and other cuboids, from 2-D representations
• know angles are measured in degrees: estimate and compare acute, obtuse and reflex angles
• draw given angles, and measure them in degrees
• identify:
  • angles at a point and one whole turn (total 360o)
  • angles at a point on a straight line and 1/2 a turn (total 180o)
  • other multiples of 90o
• use the properties of rectangles to deduce related facts and find missing lengths and angles
• distinguish between regular and irregular polygons based on reasoning about equal sides and angles
• identify, describe and represent the position of a shape following a reflection or translation, using the appropriate language, and know that the shape has not changed.

STATISTICS

• solve comparison, sum and difference problems using information presented in a line graph
• complete, read and interpret information in tables, including timetables.

NUMBER, PLACE VALUE AND ALGEBRA

• read, write, order and compare numbers up to 10 000 000 and determine the value of each digit
• round any whole number to a required degree of accuracy
• use negative numbers in context, and calculate intervals across zero
• solve number and practical problems that involve all of the above
• use simple formulae
• generate and describe linear number sequences
• express missing number problems algebraically
• find pairs of numbers that satisfy an equation with two unknowns
• enumerate possibilities of combinations of two variables

CALCULATION

• multiply multi-digit numbers up to 4 digits by a two-digit whole number using the formal written method of long multiplication
• divide numbers up to 4 digits by a two-digit whole number using the formal written method of long division, and interpret remainders as whole number remainders, fractions, or by rounding, as appropriate for the context
• divide numbers up to 4 digits by a two-digit number using the formal written method of short division where appropriate, interpreting remainders according to the context
• perform mental calculations, including with mixed operations and large numbers
• identify common factors, common multiples and prime numbers
• use their knowledge of the order of operations to carry out calculations involving the four operations
• solve addition and subtraction multi-step problems in contexts, deciding which operations and methods to use and why
• solve problems involving the relative sizes of two quantities where missing values can be found by using integer multiplication and division facts
• solve problems involving the calculation of percentages [for example, of measures, and such as 15% of 360] and the use of percentages for comparison
• solve problems involving similar shapes where the scale factor is known or can be found
• solve problems involving unequal sharing and grouping using knowledge of fractions and multiples

FRACTIONS, DECIMALS AND PERCENTAGES

• use common factors to simplify fractions; use common multiples to express fractions in the same denomination
• compare and order fractions, including fractions > 1
• add and subtract fractions with different denominators and mixed numbers, using the concept of equivalent fractions
• multiply simple pairs of proper fractions, writing the answer in its simplest form for example, 1/4 × 1/2 = 1/8
• divide proper fractions by whole numbers [for example, 1/3 ÷ 2 = 1/6 ]
• associate a fraction with division and calculate decimal fraction equivalents [for example, 0.375] for a simple fraction [for example, 3/8 ]
• identify the value of each digit in numbers given to three decimal places and multiply and divide numbers by 10, 100 and 1000 giving answers up to three decimal places
• multiply one-digit numbers with up to two decimal places by whole numbers
• use written division methods in cases where the answer has up to two decimal places
• solve problems which require answers to be rounded to specified degrees of accuracy
• recall and use equivalences between simple fractions, decimals and percentages, including in different contexts

MEASURES

• solve problems involving the calculation and conversion of units of measure, using decimal notation up to three decimal places where appropriate
• use, read, write and convert between standard units, converting measurements of length, mass, volume and time from a smaller unit of measure to a larger unit, and vice versa, using decimal notation to up to three decimal places
• convert between miles and kilometres
• recognise that shapes with the same areas can have different perimeters and vice versa
• recognise when it is possible to use formulae for area and volume of shapes
• calculate the area of parallelograms and triangles
• calculate, estimate and compare volume of cubes and cuboids using standard units, including cubic centimetres (cm3) and cubic metres (m3), and extending to other units [for example, mm3 and km3]

GEOMETRY

• draw 2-D shapes using given dimensions and angles
• recognise, describe and build simple 3-D shapes, including making nets
• compare and classify geometric shapes based on their properties and sizes and find unknown angles in any triangles, quadrilaterals, and regular polygons
• illustrate and name parts of circles, including radius, diameter and circumference and know that the diameter is twice the radius
• recognise angles where they meet at a point, are on a straight line, or are vertically opposite, and find missing angles.
• describe positions on the full coordinate grid (all four quadrants)
• draw and translate simple shapes on the coordinate plane, and reflect them in the axes

STATISTICS

• interpret and construct pie charts and line graphs and use these to solve problems
• Calculate and interpret the mean as an average